|
8KG two-component back coating glue |
 Product details:
Product description
Weidabang back coating
adhesive is a kind of single and double component product prepared by modified
polymer emulsion. It is easy to use, excellent bonding performance, anti-aging,
high temperature resistance and low temperature resistance, is vitrified brick,
polished brick, thin board brick, antique brick, mosaic, marble, artificial
stone, natural stone ideal bonding products.
Scope of application
Indoor and outdoor is
suitable for the smooth transformation after the removal of the concrete frame
transverse plate; Low water absorption of vitrified brick, polished brick, thin
brick, antique brick, culture stone, polished brick, artificial stone, natural
marble, ceramic tiles on the wall; Anti-outside wall paint cracking yellow; old
wall retrofit anti-peeling.
Use methods
1, base treatment: the base
level to keep clean, solid, no oil pollution, no batik, no dust, no loose, etc.
2, construction requirements:
the product rolled in ceramic tiles, mosaics, marble, artificial stone on the
back, one component becomes transparent (two components become dry and solid)
and then put on the cement mortar (with the Weidelbaum tile glue product for
better effect) , it is a substitute for conventional interfacial agents;
construction is prohibited on rainy days outside.
3, two-component back coating
glue: the emulsion will be mixed and then added to the powder, and then stir
evenly after the construction. After coating, leave it in the air for 2 hours
and let dry to form a film. After mixing the slurry in 6 hours from the slurry,
the slurry will gradually thicken, not conducive to brushing.
Points to note
1. The construction
temperature is from -5 ° C to 40 ° C.
2. Keep the surface to be
bonded clean and dry to avoid working in rainy days.
3. avoid glue hanging to
stick to the front, difficult to clean.
4. Do not splash glue into
the eyes. If necessary, rinse with water. Seek medical advice immediately if
feeling unwell.
5. this product does not need
to add water, open the barrel to stir evenly after direct use.
The amount of storage
6. dosage: 8kg can be painted
about 80-90 square,
7. preservation: the product
is not unsealed, placed in a cool place can be preserved for 18 months.
Product execution: JC/T547 -2017"Ceramic tile
adhesive" standard.
|
