 Product details:
Scope: various sizes can be pasted tiles, thin tiles,
marble, granite and concrete base on the interior or exterior wall.
characteristic:
1, the product is a new type of polymer-modified tile
adhesives.
2, the construction without prior tiles soaked, thin-layer
construction, easy to use, time-saving shortcuts.
3, has a good water resistance and anti-aging
properties.
4, environmental protection, non-toxic, good for the
environment.
5, waterproof performance with a certain degree of
permeability.
Construction Technology:
1, porcelain and plastic water powder and water in
accordance with 4: 1 ratio, stir into a paste, and then allowed to stand for 5
minutes, stirring once again.
2, with a toothed blade coating scraping the glue
evenly on the work surface, then gently press on the tile coating and parallel
adjustment.
3, if requested pasted bottom surface lines or deeper
stone tiles, in addition to the work surface should be at the back of the base
tile or stone tile glue applicator avoid hollowing.
Precautions:
1, the construction should be recognized before the
base surface smooth, solid, clean, free of loose.
2, after the tile adhesive applied to the base
surface, and adjust the tiles must be affixed well within 10 minutes.
3, should not have been dry the tile adhesive and then
add water and stir.
4, the product should be used under the environment of 5 ℃ ~ 40 ℃.
5, the construction of approximately 1 to 2 hours with
a damp cloth to clean the tile surface.
6, before the subsequent construction of the
construction is completed 24 hours.
7,JC/T547-2017 standard for ceramic
tile adhesives.
Storage: Store in a cool dry place, unopened product
can be stored for 18 months.
|
