 Product details:
Scope of application:
1.suitable for indoor and outdoor wall and floor tile and mosaic, stone filling. (inside the wall, the wall, the ground, the kitchen, the bathroom, the sink, the tunnel, the basement, etc.)
Construction method:
1.filling process should be in paving tiles could be conducted in 24 hours. The use of sealant before the tile gap clean, remove all dust, grease and other contaminants, but also to clear the tile gap between Loose tile binder.
2.the ratio of water: sealant powder: water = 4:1. The water poured into the clean container, slowly adding tile grout, stir evenly until no dough uniform paste, static 3-5min, then stir.
3.the sealant will be prepared along the diagonal direction of extrusion to reserved masonry cracks, not with blank diagonal movement will go to excess slurry and the gap, be careful to avoid the slurry into the gap to.
4.wait 15 to 20 minutes or surface after drying, sponge, cotton or wet towels to wipe the surface to press circle action, tile grout, grout to dense and smooth surface.
5.tile grout dry and then clean sponge sponge or cloth to wipe the surface of masonry, remove residual sealant.
Matters needing attention：
1, can not use acid detergent has been filling finishes.
2, suitable for use in the 5 to 40 OC, the construction cannot be in the rain under construction is completed within 12 hours to avoid the rain.
3, avoid will have dry mortar mixed with water.
4, suitable for the gap width of 1 ~ 12mm, more than 12mm of the gap can be customized.
5, the construction of large area should keep the expansion joint, the construction of 24 hours after the first 48 hours after the maintenance, maintenance second.
6, no glazed brick, with special construction pointing pointing tool that antique brick and porous brick, brick surface to avoid contamination.
7, the use of contact with eyes, rinse immediately with water clear and timely medical treatment.
Characteristic：
1, good water repellent performance, to overcome the "anti pulp hanging tears" and other phenomena.
2, good impervious performance, improve the overall waterproof finish.
3, rich color matching flexibility, color lasting to make decorative effect more perfect.
4, non-toxic, harmless, mildew, make facing health, clean.
Formula calculation Sealant:
1.8*(length+width)*Seam width*seam depth / length*width=kg/m2 unit: mm
Product implement JC/T1004 -2006“Ceramic wall and
floor tile use seam filler” standard.
|
