 Product details:
Scope of application:Can paste all kinds of small and middlum-sizde ceramic tile and marble.granite in the walls or interior walls of the concrete substrate.
Characteristics:
1、The product is a new type of polymer modified tile adhesives.
2、No pre-consttuction wet tiles,thin-layer consttuction,easy to use,time-saving shortcuts.
3、Has good water resistance and anti-again propertes.
4、Environmental non-toxic,environmentally frendly.
5、Has a water permeability function.
Construction technology:
1、The tle glue and water mixed in accordance with the ratio of 3.3:1,stirring cream into homogeneous paste,3 minutes standing time there-mixing.
2、Tooth scraper used to scrape mortar coated uniform surface in the work of each construction about 1m2,tile pressure and then rubbing the surface of the base and adjust the tile parallel to spend.
3、If the paste back deep ditch or stone tiles,in addition to the work of the base surface,but also tiles of stone in the back groove depart
ment adhesive past applied to avoid hollowing.
Note:
1、We must first check the pre-construction base case.
2、This product should be 5℃～40℃ in the environment.
3、After the construction of about 1 to 2 hours can be used wet tile surface clean.
4、The construction before the completion of a 24-hour follow-up construction.
5、Product implementation
JC/T1004 -2006, “Ceramic tile wall and floor sealant” standard.
Save:Store in a cool dry place,not break the seal can be stored for 18 months.
Note: Marilyn glass type general glass mosaic, with joint action. General purpuse type used for paving tile size. Flrm type than strong general 3 ~ 4 times, can be used for paving tiles, polished tiles, large marble and granite.
|
